[1]王强锋,李 磊,曹 岩,等.超细铝丝矫直过程分析及工艺优化[J].西安工业大学学报,2019,(06):653-658.[doi:10.16185/j.jxatu.edu.cn.2019.06.005 ]
 WANG Qiangfeng,LI Lei,CAO Yan,et al.Analysis and Optimization of Straightening Process for Ultra-Fine Aluminum Wire[J].Journal of Xi'an Technological University,2019,(06):653-658.[doi:10.16185/j.jxatu.edu.cn.2019.06.005 ]
点击复制

超细铝丝矫直过程分析及工艺优化()
分享到:

《西安工业大学学报》[ISSN:1673-9965/CN:61-1458/N]

卷:
期数:
2019年06期
页码:
653-658
栏目:
机械与工程技术
出版日期:
2019-12-25

文章信息/Info

Title:
Analysis and Optimization of Straightening Process for Ultra-Fine Aluminum Wire
文章编号:
1673-9965(2019)06-0653-06
作者:
王强锋李 磊曹 岩白 瑀乔 虎
(西安工业大学 机电工程学院,西安 710021
Author(s):
WANG QiangfengLI LeiCAO YanBAI YuQIAO Hu
(School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710021,China)
关键词:
超细铝丝 矫直 塑性形变 残余应力
Keywords:
ultra-fine aluminum wire straightening plastic deformation residual stress
分类号:
TH123+.1
DOI:
10.16185/j.jxatu.edu.cn.2019.06.005
文献标志码:
A
摘要:
为了改善超细铝丝矫直工艺质量,文中基于ABAQUS软件进行了超细铝丝矫直过程仿真。根据矫直工艺过程中线材的特性,对金属丝在矫直后的一些状态参数(矫直力、线材直线度、塑性形变和残余应力等)进行分析,通过对比材料矫直前后坐标的变化曲线,对矫直设备的整体构造参数、工艺技术参量及矫直方案的正确性进行分析和检验,为超细金属线材矫直理论的进一步完善以及探究如何改善矫直过程中工艺技术的相关参数配置提供参考依据。
Abstract:
In order to improve the straightening process for ultra-fine aluminum wires,the straightening process is simulated based on the ABAQUS software.According to the characteristics of wires in the straightening process,some state parameters(the straightening force,straightness of wire,plastic deformation and residual stress)of the straightened wires are analyzed.By comparing the curves of the changes in the coordinates before and after straightening,the integral structure parameters,technological parameters and the correctness of the straightening scheme of the straighteners are analyzed and checked.This study provides reference for further perfecting the straightening theory of ultra-fine metal wires and improving the configuration of related parameters in straightening process.

参考文献/References:


[1] 马立东,陈硕,黄庆学,等.棒材二辊矫直过程曲率的全流程定量解析[J].工程科学学报,2018,40(12):1549. MA Lidong,CHEN Shuo,HUANG Qingxue,et al.Quantitative Analysis of the Whole Curvature Process for TwoRoll Bar Straightening[J].Chinese Journal of Engineering,2018,40(12):1549.(in Chinese)
[2] 闫晓亮.辊式钢筋矫直弹塑性力学分析及压下规程设计[D].秦皇岛:燕山大学,2010. YAN Xiaoliang.ElastoPlastic Mechanical Analysis of Roller Bar Straightening and Design of Rolling Schedule[D].Qinhuangdao:Yanshan University,2010. (in Chinese)
[3] 赵军,曹宏强,展培培,等.纯弯曲过弯矫直等价原理及其试验验证[J].机械工程学报,2012,48(8):28. ZHAO Jun,CAO Hongqiang,ZHAN Peipei,et al.Pure Bending Equivalent Principle for Overbend Straightening and Its Experimental Verification[J].Journal of Mechanical Engineering,2012,48(8):28.(in Chinese)
[4] GUO L,ZHANG X Z,FENG C X.Continuous Bending and Straightening Technology of Q345c Slab Based on HighTemperature Creep Deformation[J].Journal of Iron and Steel Research(International),2017,24(6):595.
[5] 冯建超,陈明和,梁伟明,等.七斜辊矫直机应用程序设计与数值模拟[J].塑性工程学报,2013,20(1):16. FENG Jianchao,CHEN Minghe,LIANG Weiming,et al.Application Program Design and Numerical Simulation of SevenCrossRoller Straightener[J].Journal of Plasticity Engineering,2013,20(1):16. (in Chinese)
[6] 王广辉.七斜辊棒材矫直机理论计算及有限元分析[D].秦皇岛:燕山大学,2010. WANG Guanghui.Theoretical Calculations and FEM Analysis of SevenCrossRoller Bar Straightener[D].Qinhuangdao:Yanshan University,2010.(in Chinese)
[7] 管奔,臧勇,曲为壮,等.辊式矫直过程应力演变及其对反弯特性的影响[J].机械工程学报,2012,48(2):81. GUAN Ben,ZANG Yong,QU Weizhuang,et al.Stress Evolvement and Its Influence on Bending Behavior During Roller Leveling Process[J].Journal of Mechanical Engineering,2012,48(2):81. (in Chinese)
[8] WANG K,WANG B Y,YANG C C.Research on the MultiStep Straightening for the Elevator Guide Rail[J].Procedia Engineering,2011,16:459.
[9] SOMASUNDARAM D,KUMAR V R V.Straightening of Highly Curved Human Chromosome for Cytogenetic Analysis[J].Measurement,2014,47:880.
[10] 许石民,王春迪,王京,等.超细管材矫直机设计及矫直动态仿真分析[J].锻压技术,2016,41(2):91. XU Shimin,WANG Chundi,WANG Jing,et al.Design of Superfine Tube Straightening Machine and Straightening Dynamic Simulation Analysis[J].Forging & Stamping Technology,2016,41(2):91.(in Chinese)

备注/Memo

备注/Memo:
收稿日期:2018-10-16
基金资助:国家自然科学基金青年科学基金(51705392); 陕西省教育厅基金(16JK1366)。 第一作者简介:王强锋(1981-),男,西安工业大学讲师,主要研究方向为有限元分析理论和结构优化,E-mail:qiangfengwang@126.com。(编辑、校对 张 超)
更新日期/Last Update: 2019-12-25