[1]史建新,高 强,刘海文,等.基于过程能力指数的抽样方案设计应用[J].西安工业大学学报,2019,(06):750-754.[doi:10.16185/j.jxatu.edu.cn.2019.06.019 ]
 SHI Jianxin,GAO Qiang,LIU Haiwen,et al.Design and Application of Sampling Plan Based on Process Capability Index[J].Journal of Xi'an Technological University,2019,(06):750-754.[doi:10.16185/j.jxatu.edu.cn.2019.06.019 ]
点击复制

基于过程能力指数的抽样方案设计应用()
分享到:

《西安工业大学学报》[ISSN:1673-9965/CN:61-1458/N]

卷:
期数:
2019年06期
页码:
750-754
栏目:
管理科学与区域文化研究
出版日期:
2019-12-25

文章信息/Info

Title:
Design and Application of Sampling Plan Based on Process Capability Index
文章编号:
1673-9965(2019)06-0750-05
作者:
史建新1高 强2刘海文2徐 磊1赵汉文1
(1.陕西中烟工业有限责任公司技术中心,宝鸡 721013; 2.陕西中烟工业有限责任公司延安卷烟厂,延安 716000
Author(s):
SHI Jianxin1GAO Qiang2LIU Haiwen2XU Lei1ZHAO Hanwen1
(1.Technical Center,China Tobacco Shaanxi Industrial Co.,Ltd.,Baoji 721013,China2.Yan'an Cigarette Factory,China Tobacco Shaanxi Industrial Co.,Ltd.,Yan'an 716000,China)
关键词:
过程能力指数 抽样方案 样本容量 质量损失函数
Keywords:
process capability index sampling plan sample size quality loss function
分类号:
F406.3; TS452
DOI:
10.16185/j.jxatu.edu.cn.2019.06.019
文献标志码:
A
摘要:
为更好控制产品质量,减少生产成本损失,本文在过程能力指数的基础上提出两种抽样方案,在生产与抽样检验这两者之间建立成本和质量的联系,生产时凭借着产品质量成本以及质量特性这两个指标,对生产过程能力作出合理评价并给出有效判断。研究结果表明:基于接收概率曲线的抽样方案,估算过程能力指数,确定样品抽样容量。基于产品质量特性反馈控制过程能力指数的抽样方案,通过质量损失函数给出明确的抽样控制界限和抽样间隔,采用合理的抽样频率以及抽样容量,可以使得过程收益最大,使得部分或总的过程控制成本最小。
Abstract:
In order to better control the quality of products and minimize the loss of production cost,this paper proposes two sampling schemes based on the process capability index,establishing a cost and quality link between production and sampling inspection.With the two indicators of product quality cost and quality characteristics,a reasonable evaluation and sound judgement of the production process capability are made.The result of research shows that:based on the sampling scheme of the receiver probability curve,estimate the process capability index,determine the sampling capacity of the sample under the condition of non-normal distribution.Based on the sampling plan of product quality characteristics feedback control process capability index,the explicit sampling control limit and sampling interval are given by the mass loss function.The reasonable sampling frequency and sampling capacity can maximize the process benefits,and minimize the partial or total process control costs.

参考文献/References:


[1] 付超,胡旭洁,于红艳,等.基于卡方分布的统一多学科可靠性分析[J].计算机集成制造系统,2017,23(7): 1439. FU Chao,HU Xujie,YU Hongyan,et al.Unified Multidisciplinary Reliability Analysis by ChiSquared Distributions[J].Computer Integrated Manufacturing Systems,2017,23(7):1439.(in Chinese)
[2] 范国平.生产制造中关键工序的质量控制[J].机械工程师,2010(3):65. FAN Guoping.Quality Control of Key Procedure in Manufacturing[J].Mechanical Engineer,2010(3):65.(in Chinese)
[3] 魏世振,韩玉启.过程能力指数在质量损失研究中的应用[J].管理工程学报,2002,16(4):64. WEI Shizheng,HAN Yuqi.The Application of Process Capability Index to Quality Loss[J].Journal of Industrial Engineering and Engineering Management,2002,16(4):64.(in Chinese)
[4] 李长江,邓文平,曹元元,等.基于BoxCox变换与Johnson变换非正态过程能力分析[J].齐齐哈尔大报,2015,31(1):66. LI Changjing,DENG Wenping,CAO Yuanyuan,et al.Process Capability Analysis in NonNormality Based on BoxCox Transformation and Johnson Transformation[J].Journal of Qiqihar University(Natural Science Edition),2015,31(1):66.(in Chinese)
[5] 何倩.基于过程能力指数的计量抽样检验方案的研究[D].秦皇岛:燕山大学,2014. HE Qian.Study of the Variables Sampling Inspection Scheme based on the Process Capability Index[D].Qinhuangdao:Yanshan University,2014.(in Chinese)
[6] 杨瑞铭,林春煌,蔡绍鑫,等.基于OC曲线理论的风险监测抽样方案问题研究[J].农产品质量与安全,2014(2):57. YANG Ruiming,LIN Chunhuang,CAI Shaoxin,et al.Research on Risk Monitoring Sampling Plan based on OC Curve Theory[J].Quality and Safety of AgriculturalProducts,2014(2):57.(in Chinese)
[7] 刘小娜,杨烈兵,张怡,等.多变量质量特性的过程能力指数研究综述[J].软件,2018,39(11):129. LIU Xiaona,YANG Liebing,ZHANG Yi,et al.A Review of Process Capability Indices about Multivariate Quality Characteristic[J].Computer Engineering & Software,2018,39(11):129.(in Chinese)
[8] 田志友,田澎,王浣尘.非正态过程能力指数估计及抽样方案设计[J].工业工程,2005,8(4):86. TIAN Zhiyou,TIAN Peng,WANG Huanchen.Estimation of Process Capability Index and Sampling Design with NonNormal Distributions[J].Industrial Engineering Journal,2005,8(4):86.(in Chinese)
[9] KALAGNANAM J R,DIWEKAR U M.An Efficient Sampling Technique for Offline Quality Control[J].1997,39(3):308.
[10] 原小宇.基于田口方法的高校图书馆服务质量稳健性设计研究[D].郑州:郑州大学,2016. YUAN Xiaoyu.Research on the Robustness Design of University Library Service Quality Based on Taguchi Method[D].Zhengzhou:University of Zhengzhou,2016.(in Chinese)
[11] 张月义.质量损失函数与测量系统校准研究[D].南京:南京理工大学,2010. ZHANG Yueyi.Study of Mass Loss Function and Measurement System Calibration[D].Nanjing:Nanjing University of Science and Technology,2010. (in Chinese)
[12] 中国国家标准化管理委员会.卷烟质量:第4部分 卷烟和滤棒物理性能的测定: GB/T 22838.4-2009[S].北京:中国标准出版社,2009:1. Standardization Administration of China.Quality of Cigarettes:Part 4 Determination of Physical Properties of Cigarettes and Filter Rods:GB/T 22838.42009[S].Beijing:China Standard Press,2009:1. (in Chinese)

备注/Memo

备注/Memo:
收稿日期:2018-12-11作者简介:史建新(1980-),男,陕西中烟工业有限责任公司工程师,主要研究方向为卷烟产品工艺研究和工艺设计,卷烟加工过程数据处理分析应用,E-mail:yumi850@163.com。(编辑、校对 白婕静)
更新日期/Last Update: 2019-12-25