[1]吴镌峰,黄 杰,殷 宏,等.烟草制丝香料喷嘴雾化效果校验装置的设计[J].西安工业大学学报,2020,(01):45-54.[doi:10.16185/j.jxatu.edu.cn.2020.01.007 ]
 WU Juanfeng,HUANG Jie,YIN Hong,et al.Design of Atomization Effect Check Device for Tobacco Silk Spice Nozzle[J].Journal of Xi'an Technological University,2020,(01):45-54.[doi:10.16185/j.jxatu.edu.cn.2020.01.007 ]
点击复制

烟草制丝香料喷嘴雾化效果校验装置的设计()
分享到:

《西安工业大学学报》[ISSN:1673-9965/CN:61-1458/N]

卷:
期数:
2020年01期
页码:
45-54
栏目:
机械与工程技术
出版日期:
2020-02-15

文章信息/Info

Title:
Design of Atomization Effect Check Device for Tobacco Silk Spice Nozzle
文章编号:
1673-9965(2020)01-0045-10
作者:
吴镌峰黄 杰殷 宏王德吉
(陕西中烟工业有限责任公司汉中卷烟厂,汉中 723102
Author(s):
WU JuanfengHUANG JieYIN HongWANG Deji
(Hanzhong Cigarette Factory,China Tobacco Shaanxi Industrial Co.,Ltd.,Hanzhong 723102,China)
关键词:
双元喷嘴 雾化效果 加香加料过程 烟草制丝
Keywords:
dual nozzle atomization effect flavoring feeding process tobacco silk production
分类号:
TE96
DOI:
10.16185/j.jxatu.edu.cn.2020.01.007
文献标志码:
A
摘要:
为解决双元喷嘴在烟草制丝生产线加香加料过程筒体设备内部雾化效果无法观测的问题,设计了一种双元喷嘴雾化效果离线校验系统。该系统由安装在移动小车上的喷嘴调整定位组件、蒸汽和空压气管路、料液输送单元及电气控制单元组成,在筒体外部模拟双元喷嘴的雾化运行状况,真实模拟了实际生产条件,反映出封闭空间内喷嘴雾化喷洒距离、雾化喷洒半径等生产工艺指标。在保证双元喷嘴雾化效果均匀的前提下,进行外接管路上各控制阀开启的时间和喷嘴的间隙调整,研究加香加料泵电机运行频率与料液流速之间的关系、喷嘴检验后的快速定位。结果表明:运用该系统能使封闭的不可观察空间内喷嘴雾化距离、雾化半径和效果粒径等指标变成可观察可测量的量化值。能使料液雾化均匀,消除了喷嘴滴漏产生湿团的现象,有效降低了加香加料过程的筒体黏附量。对稳定加香加料和回潮工序物料混合的均匀性起到关键作用,为设备使用和维修人员提供最佳雾化喷洒角度和雾化效果的量化数值。
Abstract:
In order to solve the problem that the atomization effect of the dual nozzle in the roller shape equipment of the tobacco silk production line during the flavoring feeding process cannot be observed,an off-line calibration system for the atomization effect of dual nozzles was designed.The atomization operation of dual nozzles was simulated outside the roller shape equipment.The system consisted of a nozzle adjustment and positioning assembly,a steam and air pressure pipeline,a liquid flavoring delivery unit and an electric control unit installed on a moving trolley.The actual production conditions were simulated,reflecting the production process indicators such as nozzle spray distance and atomized spray radius in enclosed spaces.Therefore,it could provide quantified values of optimum spray angle and atomization for operators and maintenance staff.Under the premise of ensuring uniform atomization of dual nozzles,the system could control the opening time of each control valve and the gap adjustment of the nozzle in the external pipeline,study the relationship between the operating frequency of the perfuming feed pump motor and the feed liquid flow rate and rapid positioning after nozzle inspection and therefore satisfy the calibration requirements of the atomization effect of dual nozzles in different processes.The results show that:This system makes the nozzle atomization distance,atomization radius,effect particle size and other indicators in the closed unobservable space observable and measurable.The system can evenly atomize the liquid and eliminate the phenomenon that the nozzle drip produces wet mass,effectively reducing the amount of sticking of the flavoring feeding process.It plays an important role in the uniformity of material mixing in the process of stable flavoring.

参考文献/References:

[1] 山泽银.卷烟加料喷嘴雾化特性分析与试验研究[D].昆明:昆明理工大学,2016. SHAN Zeyin.The Analysis and Experimental Research on Atomization Characteristics of Cigarette Feeding Nozzle[D].Kunming:Kunming University of Science and Technology,2016.(in Chinese) [2] 张蒙生,毋玉莲,王聚奎,等.制丝线加香加料掺配系统计量精度的在线校准[J].烟草科技,2009(3):30. ZHANG Mengsheng,WU Yulian,WANG Jukui,et al.Online Calibration of Measuring Accuracy of Flavoring and Casing Systems in Primary Processing Line[J].Tobacco Science & Technology,2009(3):30. (in Chinese) [3] 李跃锋,李华杰,姜焕元,等.加料加香系统管路的改进[J].烟草科技,2008(6):11. LI Yuefeng,LI Huajie,JIANG Huanyuan,et al.Improvement of Pipeline in Casing and Top Flavoring System[J].Tobacco Science & Technology,2008(6):11.(in Chinese) [4] 陈文先,李梅,戴忠文,等.加香加料喷嘴调试平台的设计[J].轻工科技,2017(3):61. CHENG Wenxian,LI Mei,DAI Zhongwen,et al.Design of Debugging Platform for Incense Ingredient Nozzles[J].Light Industry Science and Technology,2017(3):61.(in Chinese) [5] 廖和滨,陈庆平,张志阳,等.润叶加料喷嘴固定支架装置的改进[J].烟草科技,2013(5):22. LIAO Hebin,CHEN Qingping,ZHANG Zhiyang,et al.Improvement of Casing Nozzle Fixture in Casing Cylinder[J].Tobacco Science & Technology,2013(5):22. (in Chinese) [6] 成大先.机械设计手册[M].6版.北京:化学工业出版社,2016. CHENG Daxian.Handbook of Mechanical Design[M].6th ed.Beijing:Chemical Industry Press,2016. (in Chinese) [7] 刘泽春,黄华发,洪伟龄,等.过程能力分析在卷烟加料均匀性评价中的应用[J].烟草科技,2010(10):5. LIU Zechun,HUANG Huafa,HONG Weiling,et al.Application of Process Capability Analysis in Evaluation of Casing Uniformity[J].Tobacco Science & Technology,2010(10):5.(in Chinese) [8] 常乃杰,张云贵,刘青丽,等.应用SPSS软件研究典型中间香型烤烟常规化学成分与烟气成分的关系[J].烟草科技,2017,50(4):31. CHANG Naijie,ZHANG Yungui,LIU Qingli,et al.Relationships Between Routine Leaf Chemical Components in Typical Medium Flavor Flue-Cured Tobacco and Mainstream Cigarette Smoke Components by SPSS[J].Tobacco Science & Technology,2017,50(4):31.(in Chinese) [9] 张荣妮,吴镌峰.加香加料系统校验方法研究[J].机械工程与自动化,2012(2):198. ZHANG Rongni,WU Juanfeng.Method of Calibrating Flavoring and Casing System[J].Mechanical Engineering & Automation,2012(2):198.(in Chinese) [10] 李玉军,张贤杰,王俊彪.喷口结构对雾化流场影响规律的数值模拟[J].西安工业大学学报,2012,32(12):994. LI Yujun,ZHANG Xianjie,WANG Junbiao.Numerical Simulation of Jet Profile Effect on Gas Flow Field in Spray Atomization[J].Journal of Xi'an Technological University,2012,32(12):994. (in Chinese) [11] 王宇,李晓,张明建,等.烟草加料过程中双流体喷嘴雾化粒径的分布特性[J].烟草科技,2018,51(3):78. WANG Yu,LI Xiao,ZHANG Mingjian,et al.Distribution Characteristics of Particle Size of Tobacco Casing Atomized by Two-Fluid Nozzles[J].Tobacco Science & Technology,2018,51(3):78. (in Chinese) [12] 李方博,张振东,李胜榴,等.基于雾幅压力的空气喷嘴雾化特性数值研究[J].农业装备与车辆工程,2018,56(4):59. LI Fangbo,ZHANG Zhendong,LI Shengliu,et al.Numerical Study on Atomization Characteristics of Air Nozzle Based on Sector Pressure[J].Agricultural Equipment & Vehicle Engineering,2018,56(4):59.(in Chinese) [13] 韩航航,陈纪寿,吴子一.“双壁两点喷射法”加香系统的设计[C]//中国烟草学会工业专业委员会烟草化学学术研讨会论文集.海口:中国烟草学会,2005:311. HAN Hanghang,CHEN Jishou,WU Ziyi.Design to Flavor Compound-Adding System “A Method of Spraying with Two Nozzles on Two Terminals”[C]//Proceedings of Symposium on Tobacco Chemistry of Industry Committee of China Tobacco Society.Haikou:China Tobacco Society,2005:311. (in Chinese)

备注/Memo

备注/Memo:
收稿日期:2019-01-03
基金资助: 陕西中烟工业有限责任公司科技项目(BA000-HZ15029.01.1.001)。 第一
作者简介:吴镌峰(1979-),男,陕西中烟工业有限责任公司汉中卷烟厂工程师,主要研究方向为烟草工业制丝线生产设备机电控制,E-mail:578075406@qq.com。
(编辑、校对 张 超)
更新日期/Last Update: 2020-02-15