[1]邰鹤立,坚增运.SiCp/AlSi10Mg激光选区熔化成形组织及性能研究[J].西安工业大学学报,2020,(01):64-69.[doi:10.16185/j.jxatu.edu.cn.2020.01.009 ]
 TAI Heli,JIAN Zengyun.Research on Microstructures and Properties of SiCp/AlSi10Mg Composites by Selective Laser Melting[J].Journal of Xi'an Technological University,2020,(01):64-69.[doi:10.16185/j.jxatu.edu.cn.2020.01.009 ]
点击复制

SiCp/AlSi10Mg激光选区熔化成形组织及性能研究()
分享到:

《西安工业大学学报》[ISSN:1673-9965/CN:61-1458/N]

卷:
期数:
2020年01期
页码:
64-69
栏目:
材料科学与工程
出版日期:
2020-02-15

文章信息/Info

Title:
Research on Microstructures and Properties of SiCp/AlSi10Mg Composites by Selective Laser Melting
文章编号:
1673-9965(2020)01-0064-06
作者:
邰鹤立 坚增运
(西安工业大学 材料与化工学院,西安 710021
Author(s):
TAI HeliJIAN Zengyun
(School of Materials and Chemical Engineering,Xi'an Technological University,Xi'an 710021,China)
关键词:
激光选区熔化 SiCp/AlSi10Mg 力学性能 微观组织
Keywords:
selective laser melting SiCp/AlSi10Mg mechanical property microstructure
分类号:
TG174.4
DOI:
10.16185/j.jxatu.edu.cn.2020.01.009
文献标志码:
A
摘要:
为研究激光选区熔化(SLM)成形工艺参数(激光功率和扫描速度)对SiCp/AlSi10Mg致密度和机械性能的影响规律,通过对SiCp/AlSi10Mg复合材料进行SLM成形,采用光学显微镜和扫描电子显微镜观察SiCp/AlSi10Mg复合材料显微组织及形貌,采用阿基米德排水法测试其致密度,同时对成形件的显微硬度进行分析。研究结果表明:所制备试样中SiC增强颗粒分布较为均匀,并与基体结合紧密。获得的SiCp/AlSi10Mg成形件最高致密度可达到96.54%,其SLM的表面硬度远高于铸件标准; 激光功率作为影响材料微观组织及力学性能的因素之一,决定了能量密度(η)的大小,当η达到48 J·mm-3 时,成形试样的显微硬度平均值为240.06 HV。研究为SLM成形SiCp/AlSi10Mg复合材料在航天和空间领域的应用提供了理论基础和实验依据。
Abstract:
The paper discusses the effect of the selective laser melting(SLM)forming process parameters(laser power and scanning speed)on the density and mechanical properties of SiCp/AlSi10Mg.SiCp/AlSi10Mg composites were formed by using SLM forming technology.The microstructure and morphology of the formed SiCp/AlSi10Mg composites were observed with an optical microscope and scanning electron microscope,and their density was measured by Archimedes drainage method with their microhardness analyzed.The results show that the SiC particles in the samples are more evenly distributed and closely bonded to the matrix.The highest density obtained reaches 96.54%,and the surface hardness is much higher than that of the standard casting.Laser power,one of the factors which influence the microstructure and mechanical properties of materials,determines the value of the energy density(η).When η reaches 48 J·mm-3,the average microhardness of the formed samples is 240.06 HV.This study provides a theoretical and experimental basis for the applications of SLM-formed SiCp/AlSi10Mg composites in aerospace and space.

参考文献/References:

[1] 章令晖,周宏志,李明珠,等.航天复合材料技术述评[J].高科技纤维与应用,2015,40(3):22. ZHANG Linghui,ZHOU Hongzhi,LI Mingzhu,et al.Review of Aerospace Composite Technology[J].Hi-Tech Fiber & Application,2015,40(3):22. (in Chinese) [2] 童惠,胡正飞,张振,等.SiC改性及其在铝基复合材料中的应用[J].金属功能材料,2015,22(1):53. TONG Hui,HU Zhengfei,ZHANG Zhen,et al.SiCp Modification and Their Application in Aluminum Matrix Composites[J].Metallic Functional Materials,2015,22(1):53.(in Chinese) [3] 郑喜军,米国发.碳化硅颗粒增强铝基复合材料的研究现状及发展趋势[J].热加工工艺,2011,40(12):92. ZHENG Xijun,MI Guofa.Research Status and Development Trend of SiCp/Al Composite[J].Hot Working Technology,2011,40(12):92.(in Chinese) [4] 张国政,吕栋腾,吴治明.碳化硅颗粒增强铝基复合材料的制备及应用的研究[J].新技术新工艺,2010,39(11):60. ZHANG Guozheng,LUY Dongteng,WU Zhiming.Research of Fabrication and Application for SiCp Particle Reinforced Aluminum Matrix Composites[J].New Technology & New Process,2010,39(11):60.(in Chinese) [5] 刘春忠,任正宜.颗粒增强铝基复合材料的制备方法和强度的影响因素[J].辽宁大学学报(自然科学版),2016,43(2):143. LIU Chunzhong,REN Zhengyi.Advance in Research on Fabrication Methods and Factors Influencing on the Strength of Particle Reinforced Al-matrix Composites[J].Journal of Liaoning University(Natural Sciences Edition),2016,43(2):143.(in Chinese) [6] 张文毓.铝基复合材料国内外技术水平及应用状况[J].航空制造技术,2015(3):82. ZHANG Wenyu.Domestic and Foreign Technical Level and Application Condition of Aluminum Matrix Composites[J].Aeronautical Manufacturing Technology,2015(3):82.(in Chinese) [7] CALIGNANO F.Design Optimization of Supports for Overhanging Structures in Aluminum and Titanium Alloys by Selective Laser Melting[J].Materials & Design,2014,64:203. [8] KANAGARAJAH P,BRENNE F,NIENDORF T,et al.Inconel 939 Processed by Selective Laser Melting:Effect of Microstructure and Temperature on the Mechanical Properties under Static and Cyclic Loading[J].Materials Science & Engineering:A,2013,588:188. [9] YADROITSEV I,SMUROV I.Selective Laser Melting Technology:From the Single Laser Melted track STABILITY to 3D Parts of Complex Shape[J].Physics Procedia,2010,5:551. [10] HU Z H,ZHU H H,ZHANG H,et al.Experimental Investigation on Selective Laser Melting of 17-4pH Stainless Steel[J].Optics & Laser Technology,2017,87:17. [11] ZHANG D Y.Model Manufacturing Process from Aluminum Alloys Using Selective Laser Melting[J].Chinese Journal of Lasers,2007,34(12):1700. [12] DAI D H,GU D D.Tailoring Surface Quality Through Mass and Momentum Transfer Modeling Using a Volume of Fluid Method in Selective Laser Melting of TiC/AlSi10Mg Powder[J].International Journal of Machine Tools and Manufacture,2015,88:95. [13] WEI K W,WANG Z M,ZENG X Y.Influence of Element Vaporization on Formabilitu,Composition,Microstructure,and Mechanical Performance of the Selective Laser Melted Mg-Zn-Zr Components[J].Materials Letters,2015,156:187. [14] ASTFALCK L C,KELLY G K,LI X P,et al.On the Breakdown of SiC During the Selective Laser Melting of Aluminum Matrix Composites[J].Advanced Engineering Materials,2017,19(8):1600835. [15] 卢健,吴卿永,张鹭,等.2024/SiCp铝基复合材料薄板的制备方法研究[J].世界有色金属,2019(16):39. LU Jian,WU Qinyong,ZHANG Lu,et al.Study of 2024/SiCp Aluminum Maxtrix Composites Sheets Prepare Method[J].World Nonferrous Metals,2019(16):39.(in Chinese) [16] 李晶,荣健,吕海青,等.固溶温度对SiC_p/Al复合材料组织及残余应力的影响[J].金属热处理,2019,44(8):154. LI Jing,RONG Jian,LYU Haiqing,et al.Influence of Solution Treatment Temperature on Microstructure and Residual Stress of SiCp/Al Composite[J].Heat Treatment of Metals,2019,44(8):154. (in Chinese) [17] 张文奇,朱海红,胡志恒,等.AlSi10Mg的激光选区熔化成形研究[J].金属学报,2017,53(8):918. ZHANG Wenqi,ZHU Haihong,HU Zhiheng,et al.Study on the Selective Laser Melting of AlSi10Mg[J].Acta Metallurgica Sinica,2017,53(8):918. (in Chinese)

备注/Memo

备注/Memo:
收稿日期:2019-10-11
基金资助:国家自然科学基金(51671151); 陕西省科技新星项目(2016KJXX-87)。 第一
作者简介:邰鹤立(1993-),男,西安工业大学硕士研究生。 通信作者简介:坚增运(1962-),男,西安工业大学教授,主要研究方向为合金凝固理论,E-mail:jianzengyun@xatu.edu.cn。
(编辑、校对 潘秋岑)
更新日期/Last Update: 2020-02-15